3D Printed Lying Hound Planter

3D printed geometric hound planters made with eco PLA filament - for more information please see the Composition tab

They are suitable for succulents, cacti and other mini plants and have drainage holes in the base

Approx. 18cm in Length (from nose to tail) x 10cm High x 8.5cm Wide

Please note: these are extremely lightweight due to the material they are printed with. They are not meant to be a heavy ornament

Available in 5 colours - please view the listing images for examples of each colour. Out of stock designs will be reprinted regularly so please keep checking for restocks

To maintain the life of your planter it is best to keep them as household decor only, not suitable for outdoor use and keep away from direct sun or heat sources

Please note that as these are 3D printed there may be slight imperfections such as faint print layer lines visible.. This is not a fault and is the nature of 3D printed designs. The bottoms have been sanded but there may still be some edges such as around the ears that are not entirely smooth

Approx. 18cm in Length (from nose to tail) x 10cm High x 8.5cm Wide

These planters are suitable for succulents, cacti and mini plants

Click on the listing images to view the colours available. The colours are descriptive names only and not the material. All these planters are made from 3D printed extremely lightweight eco filament

The colours are represented as best as possible but may differ when viewing on different screens - please refer to the Colour Disclaimer for further information

These planters are 3D printed from from Eco PLA - a bio-plastic derived from plant-based starches such as corn or sugarcane

To maintain the life of your planter it is best to keep them as household decor only, not suitable for outdoor use and away from direct sun or heat sources

Please note that as these are 3D printed there may be slight imperfections such as faint print layer lines visible. This is not a fault and is the nature of 3D printed designs. The bottoms have been sanded but there may still be some edges such as around the ears that are not entirely smooth

• What are they made of?

The planters are 3D printed from from Eco PLA - a bio-plastic derived from plant-based starches such as corn or sugarcane

• Are they heavy?

No, due to the material they are made from they are extremely lightweight

• Can I put them outside?

It is not recommended to keep these planters outside. They are best suited as indoor decor, ideally not placed in full sun with exposure to extremes of heat

• Do they have drainage holes?

Yes, the planters have been designed with drainage holes

• How big are they?

Full size details can be found in the sizing tab. They would be suitable for small succulents, cacti and mini plants

• Can I just buy the STL file and print them myself?

Currently I have no plans to sell the STL files but if this may change then I will update my socials with information

• Can you make them with different features or markings, ie to look like my own dog?

These are printed in one colour as multi colour options increase the print time and therefore the price dramatically. Features and marking cannot be changed but these models are suitable for painting with acrylic paints so you can decorate them if you wish at your own risk

Most other general questions can be answered in the Frequently Asked Questions section - here

If you still haven't found the answer then please feel free to contact me