- 3D Printed Multicoloured Lying Hound Planter
- Colour gradients will vary
-
3D Printed Multicoloured Lying Hound Planter
- A 3D Printed Planter - Please read full listing description below for more details
- £18.00
3D printed geometric hound planters made with eco PLA filament - for more information please see the Composition tab
They are suitable for succulents, cacti and other mini plants and have drainage holes in the base
Approx. 18cm in Length (from nose to tail) x 10cm High x 8.5cm Wide
Please note: these are extremely lightweight due to the material they are printed with. They are not meant to be a heavy ornament
The colour gradients will vary on these so each planter will be unique. Photos show examples only
To maintain the life of your planter it is best to keep them as household decor only, not suitable for outdoor use and keep away from direct sun or heat sources
Please note that as these are 3D printed there may be slight imperfections such as faint print layer lines visible.. This is not a fault and is the nature of 3D printed designs. The bottoms have been sanded but there may still be some edges such as around the ears that are not entirely smooth
Approx. 18cm in Length (from nose to tail) x 10cm High x 8.5cm Wide
These planters are suitable for succulents, cacti and mini plants
Colour gradients will vary and each planter is unique. All these planters are made from 3D printed extremely lightweight eco filament
The colours are represented as best as possible but may differ when viewing on different screens - please refer to the Colour Disclaimer for further information
These planters are 3D printed from from Eco PLA - a bio-plastic derived from plant-based starches such as corn or sugarcane
To maintain the life of your planter it is best to keep them as household decor only, not suitable for outdoor use and away from direct sun or heat sources
Please note that as these are 3D printed there may be slight imperfections such as faint print layer lines visible. This is not a fault and is the nature of 3D printed designs. The bottoms have been sanded but there may still be some edges such as around the ears that are not entirely smooth
What are they made of?
The planters are 3D printed from from Eco PLA - a bio-plastic derived from plant-based starches such as corn or sugarcane
Are they heavy?
No, due to the material they are made from they are extremely lightweight
Can I put them outside?
It is not recommended to keep these planters outside. They are best suited as indoor decor, ideally not placed in full sun with exposure to extremes of heat
Do they have drainage holes?
Yes, the planters have been designed with drainage holes
How big are they?
Full size details can be found in the sizing tab. They would be suitable for small succulents, cacti and mini plants
Can I just buy the STL file and print them myself?
Currently I have no plans to sell the STL files but if this may change then I will update my socials with information
Can you make them with different features or markings, ie to look like my own dog?
These are printed in one colour as multi colour options increase the print time and therefore the price dramatically. Features and marking cannot be changed but these models are suitable for painting with acrylic paints so you can decorate them if you wish at your own risk
Most other general questions can be answered in the Frequently Asked Questions section - here
If you still haven't found the answer then please feel free to contact me
